Dino is ready to Party!-Pull-Apart Cupcake Tutorial

Jump To Recipe Jump To Video

Today I'm going to show you how to make a cute and easy Dinosaur Cupcake Cake! 

There are lots of things to love about cupcake cakes, but my favorite is that you get the look of a carved cake without the stress of, well...carving! 

Learn how to make an easy Dinosaur Cupcake Cake in this free step by step cupcake tutorial!



Step away from that serrated knife--cupcakes and icing are all that you need...

How to Make a Dinosaur Cupcake Cake

First, pick your design.  Today felt like a Stegosaurus kind of day--so that's what I'm doing. 

Use a dot of frosting on the bottom of each cupcake (or at least the ones along the outer edge) so that Dino won't run away!  The smaller the space between your cupcakes, the better.


Next, frost over your cupcake creation with medium consistency icing (if your icing is very soft, it will sink down in between your cupcakes) -- I find it easier to pipe on my frosting for a cleaner look-- I'm using a medium sized round tip 12. (You could also just snip the end off of a disposable piping bag).

*You can use whatever your favorite vanilla buttercream recipe may be. Today, I'm using our Classic Vanilla Buttercream recipe which is simple to make, delicious, and develops a very slight crust.

**If you are using a traditional American Buttercream (butter, powdered sugar, milk, a little vanilla..), and your frosting is too soft, just add a little more powdered sugar. If the frosting is too thick, add a little more of your liquid.

After piping, I smoothed over everything with a spatula.

I want my Dino to have silky smooth skin  :0)  -so, I'm smoothing him over with a Viva paper towel.   Remember, this trick only works with a crusting buttercream. 

**If you aren't a fan of the smooth look (it does take a little longer), just go with a textured buttercream! I'm sure dinosaur skin wasn't silky smooth anyway, haha- so go with what ever you like. 


Next, we work on the spikes!  There are many possible variations--including fruit roll up cut-outs or fondant--but I'm going with melted white chocolate bark (or candy melts), which I melted in small increments in the microwave.

I tinted mine red with coloring powder-one of the few times I've used coloring powder but I had some one hand! -But you can also use candy coloring (which is oil based rather than water based).  You can also buy pre-colored candy melts.

Now, smooth it onto a cookie sheet lined with waxed or parchment paper.  Use a fork or cake comb to create ridges.

Use a knife to form your spikes--this will make it easier for you to break them apart nice and clean.  Pop into the freezer for five minutes, or until chocolate has hardened.

Now we're getting somewhere!  This is the fun part.  Apply a little frosting to the back of your spikes, then onto the dinosaur.

Mini chocolate chip eye, and friendly face applied with a toothpick.

Add a few buttercream dots and accents...

 few sprinkles....a chocolate party hat (leftover from our chocolate spikes)--a birthday message--and we're done!

Isn't our little dinosaur a cutie? I think kids would love this sweet cake, and he is so easy to pull apart and serve! 


Learn how to make a cute and easy Dinosaur Cupcake cake



Easy Dinosaur Cupcake Cake Tutorial

Easy Dinosaur Cupcake Cake Tutorial

Learn how to make a CUTE Dinosaur Cupcake Cake! This cake is perfect for kids parties!


  • Cupcakes- This can easily vary, but our Dinosaur was made of 12 cupcakes and 6 mini cupcakes.
  • Butterecream of Choice- We used our Classic Vanilla Buttercream Recipe
  • Candy Coating for Spikes, tinted red with coloring powder, candy coloring gel (oil based), or you can use red candy melts.
  • Coloring Gels: Americolor Sky Blue, Electric Green (or your colors of choice!)
  • Piping Tip: I outlined my dinosaur & piped on spots using a smallish round piping tip 4 (or similar). I piped on the green frosting with a medium round tip 12 (or just snip the end off of your disposable piping bag). I used a round tip 3 or 4 for the birthday message.
  • Mini Chocolate Chip for eye (Don't buy a bag of chips for one eye- you can pipe it on also!)
  • Toothpick for adding a smile
  • Cake comb (optional) for making pattern in the chocolate spikes
  • Sprinkles- we used flat confetti sprinkles


  1. Assemble cupcakes into the shape of the dinosaur, adding a dot of buttercream to the bottom of the cupcake liner to "glue" them to the platter or cake base. The less space between the cupcakes, the better...you can stagger the placement to minimize the open spaces between cupcakes.
  2. Pipe on the green (medium consistency) buttercream using a medium round tip 12 or you can also snip the tip off of a disposable piping bag.
  3. Gently smooth over the frosting with an offset spatula.
  4. If you want a smooth finish and are using a crusting buttercream (like our classic vanilla or fluffy vanilla recipes), allow the frosting to set up for about 5-10 minutes after frosting and then gently smooth over it with a Viva paper towel. Hold the towel on the surface of the frosting, and gently slide your hand back and forth.
  5. Melt your candy coating in a microwave safe bowl in small increments until melted. Tint with red candy coloring or red coloring powder if you aren't using red candy melts.
  6. Spread over a parchment lined cookie sheet, comb with a cake comb if you'd like the added detail, score the chocolate as pictured so that they will break apart in spikes more easily later, chill in the freezer for about 10 minutes or until firm, and then adhere to the dinosaur with a little fresh buttercream.
  7. I used one of the spikes as a party hat and decorated with sprinkles and blue buttercream trim.
  8. Add mini chocolate chip eye (or eye of choice) and draw on a mouth with a tooothpick.
  9. Add blue spots, birthday message with a small round tip 3 or 4, and any other details you'd like!

Love Cupcake Cake Designs? Don't miss our Roundup of Favorites!

We love cupcake cakes and the options are endless. Here are some of our cupcake cake tutorials as well as pull apart cupcake cake designs from other sites that we just love! Favorite Cupcake Cake Designs


MyCakeSchool.com's Roundup of the BEST Cupcake Cake Tutorials and Ideas! So quick and simple!






Leave a Reply

Your email address will not be published. Required fields are marked *

The maximum upload file size: 2 MB. You can upload: image. Drop file here


  1. Hi Liz, Your Dinosaur looks terrific!

    Hi Kayla, We didn't have notes on the size of this Dinosaur cake, so I measured the tray we had it on. I think the cake is approximately 17 inches in length and 10 inches high, so you will need a cake board to accommodate that length. The length is the important number. The cake board be slightly longer than the dinosaur and the cake board will determine the size of cake box you need. The cake board should fit snuggly into the box so it won't move around very much during transport.

  2. Hi Karen- Yes, I used a combination of mini cupcakes and regular sized-- Minis for the head, legs, and end of the tail-- but I'm sure you could make it work with all regular sized if you don't want to make two sizes. For the fruit roll ups, I'm not sure...aren't they pretty floppy? I would think that you could use them, but you may not be able to let much hang off of the edge--it would still be cute though. Have fun with this design!

  3. Thanks Rebecca,

    There's a point when the melted candy coating takes on a slightly matte finish but is still soft. That is a good time to try cutting shapes. If you wait until the chocolate coating is firm, it will be difficult to get a clean cut and will be more likely to break.

  4. Hi Melissa!- I would just google "T-Rex Cupcake Cake" and see what pops up! There are several different styles that I have seen- some more involved than others. I'll link one example below. Another thought is to do a cupcake cake frosted to look like grass and water or leaves, etc. and put t-rex toys on top ;0)


  5. Here’s mine - made for my grandson! I took a few creative liberties with the design....kind of wish I hadn’t LOL! I wasn’t able to get smooth skin on my Dino so I was a bit disappointed with that. I was wondering....do you need to allow the icing to crust before attempting to smooth it?

  6. Hi Sabrina!! Thanks so much for sharing the photo, I love him!

    Yes, if you are wanting to smooth out the frosting and you're working with a crusting buttercream, it should crust after about 5-10 minutes and then you can go in and smooth over it.

    A little texture works too for dinosaurs ;0) You did a great job!

  7. Very nice instructions had fun making this cupcake cake used star tip instead on the body. Was loved by my Grandson.Thanks